Dr Fixit Pidifin 2K Waterproofing Chemical

Dr. Fixit Pidifin 2K is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured. Dr. Fixit Pidifin 2K will become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface. Area of Application ● Concrete foundations, basements wall and lift pits. ● Swimming pools, water tanks and reservoirs ● Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters. ● Any other concrete, cement or masonry surface subject to damage from moisture. Features & Benefits ● Quick drying ● Easily applied by brush or trowel ● Flexible ● Excellent adhesion to concrete and masonry substrates ● Non toxic substances ● Environmentally friendly – free Volatile Organic Compound (VOC) ● Can be applied on damp surface. ● Excellent waterproofing property – No leakage up to 10 m. hydrostatic pressure. Method of Application 1 Surface Preparation ● Allow new concrete and masonry substrate to fully cure prior application. ● All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might effect adhesion. Spalled Concrete must be sound before applied. ● Substrate should be reach a “Saturated Surface Dry” (SSD) condition (damp, without standing water) 2 Mixing ● Using Portland mechanical mixer, slowly add Powder part to Liquid part in a clean container until a smooth and homogenous slurry mixture is achieved. ● Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application. Mixing material must be use within recommend pot life. 3 Applications ● Dr. Fixit Pidifin 2K slurry can be applied by brush or trowel. DO NOT dilute with water. Recommended coverage rate is approximately 1.1 kg./m2/coat for 0.8 mm. thick of wet film thick (minimum 2 coat.) ● Allow the slurry to cure for at least 1 hour before applying a second coat. 4 Curing ● For maximum protection, allow 12 to 24 hours curing time after the second coat. ● Dr. Fixit Pidifin 2K requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site” to ‘requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site’
● 12 month storage in sealed container and room temperature Health & Safety Precautions ● Non Flammable ● Avoid contact with skin and eyes. Any splashes to the skin or eyes should be washed off with clean water ● Wear mask when mixing. ● Wear protective gloves and eye protection when applied